ADG1308BRZ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 8:1. Operating temperature around -40°C~105°C TA extended. There are 16 terminations totally. The electronic part provides high-quality output because it has 8 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. It is part of the design of the 16 series that this electronic component is included. There are 1 circuits in this multiplexer. Try searching with ADG1308 if you're looking for variants. It has an internal resistance of 210Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Multiplexers should not be powered above 16.5V in normal situations. There should be 5V voltage fed to the electrical part below 5V. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. If you are using a dual power supply, you should attach at least 5V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The electronic component can function from 15V. 500MHz-bandwidths can be used to transfer data between multiplexers.
ADG1308BRZ Features
8 Channels
Bandwidth: 500MHz
ADG1308BRZ Applications
There are a lot of Analog Devices Inc. ADG1308BRZ Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Fault Tolerant Systems
- Industrial
- Digital Cross-Connects
- Audio signal routing
- Medical
- Precision instrumentation
- Automatic test equipment
- Medical Instrumentation
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
