Name: 74HC4066PW-Q100,11
Brand: Nexperia USA Inc.
SKU: 74HC4066PW-Q100,11
Price: 0.57000 USD
Availability: InStock

new-10%

74HC4066PW-Q100,11

Manufacturer part number:74HC4066PW-Q100,11

Manufacturer:Nexperia USA Inc.

Description:30ns, 20ns SPST - NO 95Ohm DUAL Analog Switches 74HC4066 14 Pins 1μA 5V 14-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:74HC4066PW-Q100,11 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	4 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	140.30179mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2011
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	128Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	500mW
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	74HC4066
Pin Count	14
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	10V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	40μA
Power Dissipation	100mW
Propagation Delay	90 ns
Turn On Delay Time	90 ns
Logic Function	Demultiplexer, Multiplexer
Supply Type	Single
-3db Bandwidth	200MHz
On-State Resistance (Max)	95Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	50 dB
Number of Input Lines	2
Current - Leakage (IS(off)) (Max)	1μA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	30ns, 20ns
Channel-to-Channel Matching (ΔRon)	3 Ω
Crosstalk	-60dB @ 1MHz
Switch-on Time-Max	150ns
Voltage - Supply, Single (V+)	2V~10V
Drain to Source Resistance	105Ohm
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

74HC4066PW-Q100,11 Product Details

74HC4066PW-Q100,11 Overview

As the electronic part is packed in 14-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~125°C TA. The total number of terminations is 14. The electronic part provides high-quality output because it has 1 channels. A 5V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 14 series. The analog switch ics are built using SPST - NO switching circuits. The circuits in this analogue multiplexer number 4. Try searching with 74HC4066 if you're looking for variants. An switch multiplexer with 128Ohm internal resistance has a value of 128Ohm. You can find the functions of the 14 pins in the datasheets. In normalcircumstances, users should not exceed 10V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 2V. The switch device would be able to operate with 40μA current. This analog switch requires a voltage of 2V~10V to drain from a single voltage supply. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. There is 105Ohm resistance between Drain and Source for this electronic part. It comes from the Automotive, AEC-Q100 series.