MAX312LESE+ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 16 pins are injected into the body of the electronic part. Based on SPST - NC switching circuits, these analog multiplexers work. This multiplexer is composed of 4 circuits. Use MAX312 to search for variants of the digital switches. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. For details about the functions of 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 30V voltage to the switch device. A analog switch ic that has a cost-effective Dual, Single supply type. A low voltage of 4.5V should be applied to the electronic component. If you put voltage higher than 200μA on the digital multiplexer, damage may occur. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 4.5V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The electrical part can be operated at 18V voltage levels.
MAX312LESE+ Features
1 Channels
Switch Circuit: SPST - NC
MAX312LESE+ Applications
There are a lot of Maxim Integrated MAX312LESE+ Analog Switches & Multiplexers ICs applications.
- DSUs
- Multiplexers
- Precision test equipment
- Frame Relay Equipment
- Central office
- Ultrasound
- 65 V DACs
- PBX interfaces
- Cell phones
- Modems
