Name: ADG1434YRUZ
Brand: Hotenda
SKU: ADG1434YRUZ
Price: 9.99000 USD
Availability: InStock

new

ADG1434YRUZ

Manufacturer part number:ADG1434YRUZ

Manufacturer:Hotenda

Description:170ns, 75ns SPDT 4.7Ohm Analog Switches BREAK-BEFORE-MAKE ADG1434 20 Pins 300pA 5V 20-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG1434YRUZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	4.7Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.6mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1434
Pin Count	20
Number of Outputs	8
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Nominal Supply Current	260μA
Power Dissipation	6.6mW
Max Supply Current	475μA
Turn On Delay Time	170 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	4.7Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	300pA
Channel Capacitance (CS(off), CD(off))	12pF 22pF
On-state Resistance Match-Nom	0.55Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	170ns, 75ns
Insertion Loss (dB)	0.24 dB
Charge Injection	-50pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	4Ohm
Height	1.05mm
Length	6.5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1434YRUZ Product Details

ADG1434YRUZ Overview

Presented in 20-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -40°C~125°C TA. Totally, there are 20 terminations. A high-quality output is provided by the electrical component's 4 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. A total of 20 pins are injected into the electrical part body. A SPDT switching circuit is used for these analog switches. Using the ADG1434 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 4.7Ohm. For details about the functions of 20 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 5V is the lowest voltage the electrical component should receive. Putting voltage greater than 475μA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 16.5V. With dual power supplies, you should attach at least 4.5V. The electrical part can be operated at 12V voltage levels. The 4 inputs need to be operated in order to work. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths. A Drain to Source resistance of 4Ohm is shown for this electronic part. In this digital multiplexer, there are 8 outputs.