Name: TS12A12511DRJR
Brand: Texas Instruments
SKU: TS12A12511DRJR
Price: 2.18000 USD
Availability: InStock

new-10%

TS12A12511DRJR

Manufacturer part number:TS12A12511DRJR

Manufacturer:Texas Instruments

Description:95ns, 50ns SPDT 5Ohm Typ Analog Switches BREAK-BEFORE-MAKE TS12A12511 8 Pins 1nA 5V 8-WDFN Exposed Pad

Case Package:SOT-23

Datasheet:TS12A12511DRJR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-WDFN Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	5Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	TS12A12511
Pin Count	8
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	70nA
Max Supply Current	1μA
Turn On Delay Time	80 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~6V
Supply Type	Dual, Single
Bandwidth	93MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	41 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	5Ohm Typ
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	14pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	95ns, 50ns
Charge Injection	26pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	95ns
Switch-off Time-Max	50ns
Height	800μm
Length	4mm
Width	4mm
Thickness	670μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS12A12511DRJR Product Details

TS12A12511DRJR Overview

Shipping overseas is convenient due to the electrical component's packing in 8-WDFN Exposed Pad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. Around -40°C~85°C TA is the extended operating temperature. In total, there have been 8 terminations. As a result of its 1 channels, this electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. As part of its design, the 8 series is equipped with this electronic component. SPDT switching circuits are used in these analog switch ics. Use TS12A12511 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 5Ohm. For functions related to 8 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. A analog switch ic that has a cost-effective Dual, Single supply type. The lowest voltage the electronic part should receive is 2.7V. The analogue multiplexer could operate on 70nA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. Despite this switch device's dual supply capability, its voltage should not exceed 6V. The voltage should be at least 2.7V if you are using dual power supplies. The electrical component supports 1 inputs. In 93MHz-bandwidths, data can be transferred. 2 outputs are included in the analogue multiplexer.