MAX1771CSA+T Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The program can handle Transistor Driver dc switching's outputs (s). Voltages 3V~16.5V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. In this switching controller, the switch can be set to 300kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable. A SWITCHING CONTROLLER analog IC is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. An array of 8 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE FREQUENCY MODULATION. Search for "MAX1771" to find other relevant dc to dc converter ics. In total, switching converter has 8 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 3V. Based on the test statistics, DC regulator outputs voltage 12V. If you are starting a new project, you should note the dc dc regulator's typical output current is 2A. voltage regulator dc to dcs with a 92 % duty cycle are designed to be reliable when powered on and powered off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. The max frequency of the pmic can reach 500kHz.
MAX1771CSA+T Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE FREQUENCY MODULATION
Max Duty Cycle: 92 %
MAX1771CSA+T Applications
There are a lot of Maxim Integrated MAX1771CSA+T DC to DC converter applications.
- Window air conditioners
- Drilling machines
- Gear/thread machining machines
- Pipe bending machines
- Smoke exhaust equipment
- CMM
- Imported equipment
- Emergency lighting monitoring equipment
- Correction machines
- Surface processing equipment
