Name: LM5116WG/NOPB
Brand: Texas Instruments
SKU: LM5116WG/NOPB
Price: 185.86000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-CSOIC (0.275, 7.00mm Width)
Number of Pins	20
Operating Temperature	-40°C~125°C TJ
Packaging	Tube
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Terminal Position	DUAL
Terminal Form	GULL WING
Base Part Number	LM5116
Function	Step-Down
Output Voltage	80V
Output Type	Transistor Driver
Operating Supply Voltage	100V
Input Voltage-Nom	48V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	4.6mA
Output Configuration	Positive
Output Current	3.5A
Voltage - Supply (Vcc/Vdd)	6V~100V
Quiescent Current	4.6mA
Control Features	Enable, Frequency Control, Ramp, Soft Start
Input Voltage (Min)	6V
Topology	Buck
Control Mode	CURRENT-MODE
Frequency - Switching	200kHz 535kHz
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Switcher Configuration	PUSH-PULL
Max Frequency	1MHz
Max Duty Cycle	98 %
Isolation	Non-Isolated
Number of Output Phases	1
Height	2.591mm
Length	13.716mm
Width	7.239mm
Thickness	1.905mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

LM5116WG/NOPB Product Details

LM5116WG/NOPB Overview

With a 20-CSOIC (0.275, 7.00mm Width) package, the switching controller is suitable for a wide range of applications. PMIC is packaged in a solid enclosure of Tube. With Transistor Driver dc switching's output (s), it is able to handle it. 6V~100V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. There is a switch at 200kHz 535kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Ramp, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 20 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 48V. A search for "LM5116" will reveal other relevant dc to dc converter ics. 20 pins are present on switching converter. An input voltage of 6V is the minimum required for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 80V voltage. normally, the dc dc regulator's output current is 3.5A, which you should keep in mind when starting a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 98 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 1MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 100V. During dormancy, the dc switching uses 4.6mA. It runs on a 4.6mA supply current. Switches with 1 phases are used in this controller.