UCC2813PW-5G4 Overview
As a result of 8-TSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Tray enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 3.6V~12V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. switching converters terminal (s) are designed to be at DUAL. Various 8 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. In addition to "UCC2813", there are other relevant dc to dc converter ics you can find. 8 pins are on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended that the input voltage of the dc dc voltage regulator be 4V. According to the test statistics, DC regulator outputs 1V voltage. You should note that the dc dc regulator's usual output current is 200mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. 1MHz is the frequency of the switching controller. The supply voltage must be 10V. The controller should not be supplied with more current than 30mA. 1MHz is the frequency at which this controller performs well most of the time.
UCC2813PW-5G4 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
Switching Frequency: 1MHz
UCC2813PW-5G4 Applications
There are a lot of Texas Instruments UCC2813PW-5G4 DC to DC converter applications.
- Magnetohydrodynamic power
- Geothermal power
- Nuclear power plants
- Various precision measuring detectors
- Servo drive system
- Smoke exhaust equipment
- Boring machines
- Correction machines
- Surge protection circuits
- Product testing
