MAX17041G+U Overview
A system battery like this uses an analog IC named POWER SUPPLY MANAGEMENT CIRCUIT. We have 1 channels available. 8 pins are attached to it. Tube is the case number of the package. It is recommended that you mount this electrical component using Surface Mount. The voltage supply for this electric component should not be less than 2.5V volts. It is recommended that the power management IC's supply voltage is 4.5V higher than 4.5V volts. In order for this system battery to be activated, its value cannot be less than 0. A temperature below 70°C is recommended for its use. You should leave this transceiver ic set to 3.6V at all times. The power IC has a total of 8 pins. (Isup) must have a maximum current of 0.075mA. This system battery's operating supply voltage falls within the range of 4.5V. This power management IC can supply a maximum current of 75μA. Powered by a 75μA supply current, it operates on minimal power.
MAX17041G+U Features
with 8 Pins
operate supply voltage at the range of 3.6V
Output Voltage at the range of 30mV
MAX17041G+U Applications
There are a lot of Maxim Integrated
MAX17041G+U Battery Management ICs applications.
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
- Solar and wind-generating plants
- Electric street sweepers
- Shuttle robots
- Robots
