Name: DG413FDY+T
Brand: Maxim Integrated
SKU: DG413FDY+T
Price: 4.61000 USD
Availability: InStock

new-10%

DG413FDY+T

Manufacturer part number:DG413FDY+T

Manufacturer:Maxim Integrated

Description:175ns, 145ns SPST - NO/NC 35Ohm Analog Switches DG413 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG413FDY+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	1994
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	85Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Base Part Number	DG413
Pin Count	16
JESD-30 Code	R-PDSO-G16
Operating Supply Voltage	18V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	36V
Min Supply Voltage	9V
Nominal Supply Current	355μA
Max Supply Current	600μA
Throw Configuration	SPST
Turn On Delay Time	250 ns
Voltage - Supply, Single/Dual (±)	9V~36V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	15pF 47pF
On-state Resistance Match-Nom	0.2Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-105dB @ 1MHz
Switch-on Time-Max	175ns
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG413FDY+T Product Details

DG413FDY+T Overview

As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 16 pins. Based on SPST - NO/NC switching circuits, these analog multiplexers work. 4 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with DG413. As far as internal resistance is concerned, it has 85Ohm. In normalcircumstances, users should not exceed 36V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. 9V is the lowest voltage the electrical component should receive. The switch multiplexer may be damaged if it is exposed to voltage greater than 600μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. It is recommended that you attach at least 4.5V to your dual power supply. Operating voltages of 18V are compatible with the electrical part.