DG417CY+T Overview
Shipping overseas is convenient with the electronic component packed in 8-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 1:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around 0°C~70°C TA. A total of 8 terminations have been recorded. By its 1 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 8 series. On the other hand, analog switches can be constructed using SPST - NC switching circuits. 1 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with DG417. In this multiplexer, the internal resistance is 100Ohm. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. A analog switch ic that has a cost-effective Dual, Single supply type. 10V is the lowest voltage the electrical component should receive. For this digital switch to work, 100pA current would suffice. It may damage the digital multiplexer if the voltage is higher than 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. 18V operating voltages can be used with this electrical part. It can conduct 2-bit signals.
DG417CY+T Features
1 Channels
Switch Circuit: SPST - NC
100pA Supply Current
2-Bit
DG417CY+T Applications
There are a lot of Maxim Integrated DG417CY+T Analog Switches & Multiplexers ICs applications.
- Cable PC
- Imaging
- Transmit
- Relay Replacement
- Fiber In The Loop (FITL)
- PCMCIA cards
- Remote wireless modules
- Channel Banks
- Industrial and process control systems
- Communication systems
