Name: ADG1209YRZ
Brand: Hotenda
SKU: ADG1209YRZ
Price: 7.22000 USD
Availability: InStock

new-10%

ADG1209YRZ

Manufacturer part number:ADG1209YRZ

Manufacturer:Hotenda

Description:95ns, 100ns SP4T 200Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1209 16 Pins 100pA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ADG1209YRZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	120Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.8mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1209
Pin Count	16
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	220μA
Power Dissipation	4.8mW
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Bandwidth	550MHz
Supply Current-Max (Isup)	0.33mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	83 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.5pF 4.5pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	95ns, 100ns
Charge Injection	0.4pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	115ns
Switch-off Time-Max	140ns
Drain to Source Resistance	120Ohm
Signal Current-Max	0.03A
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1209YRZ Product Details

ADG1209YRZ Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. The operating temperature is extended to around -40°C~125°C TA. There are 16 terminations totally. A electrical component with 4 channels is capable of high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. There are 16 pins injected into the electronic part body. A SP4T switching circuit is used to build these analog multiplexers. 2 circuits are used in this analogue multiplexer. Use ADG1209 to search for variants of the digital switches. As far as internal resistance is concerned, it has 120Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. The lowest voltage fed to the electronic component should be 5V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. When using dual power supplies, you should attach at least 5V. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. Operating voltages range from 12V. Operating the 8 inputs requires 8 inputs. The data can be transferred over a wide range of bandwidths, called 550MHz bandwidths. There is 120Ohm resistance between the Drain and Source on this part.