Name: DG401CY+
Brand: Maxim Integrated
SKU: DG401CY+
Availability: InStock

new-10%

DG401CY+

Manufacturer part number:DG401CY+

Manufacturer:Maxim Integrated

Description:150ns, 100ns SPST - NO 45Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG401CY+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Operating Temperature	0°C~70°C TA
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	15V
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	20
Output	SEPARATE OUTPUT
Pin Count	16
JESD-30 Code	R-PDSO-G16
Qualification Status	Not Qualified
Power Supplies	5+-15V
Number of Channels	1
Number of Circuits	2
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Neg Supply Voltage-Nom (Vsup)	-15V
On-State Resistance (Max)	45Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	150ns, 100ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	150ns
Switch-off Time-Max	100ns
Normal Position	NO
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
RoHS Status	ROHS3 Compliant

DG401CY+ Product Details

DG401CY+ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around 0°C~70°C TA. In total, 16 terminations have occurred. A 1 channel electronic part produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. A SPST - NO switching circuit is used for these analog switches. It consists of 2 circuits. Theswitch device is a typical Multiplexer or Switches. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.