Name: ADG786WBCPZ-REEL7
Brand: Hotenda
SKU: ADG786WBCPZ-REEL7
Availability: InStock

new-10%

ADG786WBCPZ-REEL7

Manufacturer part number:ADG786WBCPZ-REEL7

Manufacturer:Hotenda

Description:21ns, 10.5ns SPDT 4.5Ohm QUAD Analog Switches ADG786 20 Pins 100pA 2.5V 20-WFQFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG786WBCPZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	14 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	20-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, ADI0012
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	20
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Additional Feature	5 VOLT NOMINAL VOLTAGE ALSO AVAILABLE
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG786
Pin Count	20
Number of Channels	1
Interface	Parallel
Number of Circuits	3
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Test Frequency	1MHz
Power Dissipation	5μW
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Bandwidth	160MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
On-State Resistance (Max)	4.5Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	21ns, 10.5ns
Charge Injection	5pC
Crosstalk	-80dB @ 1MHz
Switch-off Time-Max	16ns
Height Seated (Max)	1mm
Length	4mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG786WBCPZ-REEL7 Product Details

ADG786WBCPZ-REEL7 Overview

The electronic component is convenient to ship overseas because it is packed in a 20-WFQFN Exposed Pad, CSP. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 20. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 2.5V volts, the electrical component should be turned on and run. An electrical component of this type can be found in the 20 series. On the other hand, analog switches can be constructed using SPDT switching circuits. There are 3 circuits in this switch device. Use ADG786 to search for variants of the digital switches. The functions of 20 pins can be found in the datasheets. Multiplexers should not be powered above 5.5V in normal situations. It is recommended to use 1.8V as the lowest voltage for the electrical part. 160MHz bandwidths enable data to be transferred. Don’t miss additional features of the electronic component such as: 5 VOLT NOMINAL VOLTAGE ALSO AVAILABLE. The series starts with Automotive, ADI0012.