Name: TS5A3167DBVRG4
Brand: Texas Instruments
SKU: TS5A3167DBVRG4
Availability: InStock

new-10%

TS5A3167DBVRG4

Manufacturer part number:TS5A3167DBVRG4

Manufacturer:Texas Instruments

Description:7.5ns, 11ns SPST - NC 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A3167 5 Pins 20nA 1.8V SC-74A, SOT-753

Case Package:SOT-23

Datasheet:TS5A3167DBVRG4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Weight	11.198062mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
Resistance	900mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	TS5A3167
Output	SEPARATE OUTPUT
Pin Count	5
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	7 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	11.5 ns
-3db Bandwidth	150MHz
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	19pF 18pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	7.5ns, 11ns
Charge Injection	6pC
Switching	MAKE-BEFORE-BREAK
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NC
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3167DBVRG4 Product Details

TS5A3167DBVRG4 Overview

As the electronic part is packed in SC-74A, SOT-753, international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. A total of 5 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 5 series. The analog switch ics are built using SPST - NC switching circuits. Using the TS5A3167 search parameter, you can discover variants of the switch. Analog switches have 900mOhm internal resistance. For functions related to 5 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. A low voltage of 1.65V should be applied to the electronic component. For this digital switch to work, 10nA current would suffice. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. The analogue multiplexer may be damaged if voltage is greater than 100nA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. There are 1 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths.