Name: 5962-9204102MEA
Brand: Maxim Integrated
SKU: 5962-9204102MEA
Availability: InStock

new-10%

5962-9204102MEA

Manufacturer part number:5962-9204102MEA

Manufacturer:Maxim Integrated

Description:250ns, 170ns SPST - NO 85Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 16 Pins 500pA 15V 16-CDIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:5962-9204102MEA Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	24 Weeks
Contact Plating	Lead, Tin
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-CDIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2000
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	160Ohm
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Multiplexer or Switches
Max Power Dissipation	800mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	20
Pin Count	16
Operating Supply Voltage	28V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	30V
Min Supply Voltage	10V
Operating Supply Current	100μA
Turn On Delay Time	400 ns
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	200 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	85Ohm
Min Dual Supply Voltage	4.5V
Screening Level	MIL-STD-883
High Level Output Current	30mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	4pF 4pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	250ns, 170ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	4 Ω (Max)
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	210ns
Normal Position	NO
Radiation Hardening	No
RoHS Status	RoHS Compliant

5962-9204102MEA Product Details

5962-9204102MEA Overview

Due to its 16-CDIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around -55°C~125°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. Electronic part bodies are injected with 16 pins. SPST - NO switching circuits are used in these analog switch ics. A 4 circuit is present in this switch device. Internally, this switch multiplexer has a resistance of 160Ohm. You can find the functions of the 16 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 30V. In order for the electronic part to function properly, the lowest voltage should be 10V. The switch device would be able to operate with 100μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. If you are using a dual power supply, you should attach at least 4.5V. It can operate from 28V operating voltages.