Name: DG333ADJ-E3
Brand: Vishay Siliconix
SKU: DG333ADJ-E3
Availability: InStock

new-10%

DG333ADJ-E3

Manufacturer part number:DG333ADJ-E3

Manufacturer:Vishay Siliconix

Description:175ns, 145ns SPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE DG333 20 Pins 250pA 15V 20-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:DG333ADJ-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	20-DIP (0.300, 7.62mm)
Number of Pins	20
Weight	2.508989g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2014
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Resistance	75Ohm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Max Power Dissipation	890mW
Technology	CMOS
Number of Functions	4
Supply Voltage	15V
Base Part Number	DG333
Pin Count	20
Number of Outputs	8
Number of Channels	4
Number of Circuits	1
Max Supply Voltage	40V
Min Supply Voltage	5V
Operating Supply Current	200μA
Nominal Supply Current	200μA
Power Dissipation	890mW
Max Supply Current	200μA
Turn On Delay Time	175 ns
Voltage - Supply, Single/Dual (±)	5V~40V ±4V~22V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	4V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height	3.81mm
Length	26.92mm
Width	7.11mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG333ADJ-E3 Product Details

DG333ADJ-E3 Overview

The electrical component comes in 20-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tube. In Through Hole, this analog switch is mounted. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. Total terminations are 20. Due to its 4 channels, the electrical component produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. A total of 20 pins are injected into the electrical part body. Circuits based on SPDT switching are used to construct these analog switch ics. Circuits number 1 make up this analogue multiplexer. DG333 can be used to search for analog multiplexer variants. There is 75Ohm internal resistance in this digital multiplexer. For functions related to 20 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 40V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. 5V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 200μA. If you put voltage higher than 200μA on the digital multiplexer, damage may occur. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. If you are using a dual power supply, you should attach at least 4V. 8 outputs are included in the analogue multiplexer.