DG9263DY-E3 Overview
Due to its 8-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 8 terminations. A high-quality output is provided by the electrical component's 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. It is injected into the electrical part body with 8 pins. Based on SPST - NO switching circuits, these analog multiplexers work. Use DG9263 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 60Ohm. Datasheets for 8 pin functions are available upon request. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 12V. A cost-effective Single supply type analogue multiplexer. There should be 2.7V voltage fed to the electrical part below 2.7V. In order to operate this switch device, it would need a current of 1μA. A voltage of 2.7V~12V is required for this switch device, which drains from a single voltage source. The analogue multiplexer may be damaged if voltage is greater than 1μA. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. The 2 inputs need to be operated in order to work.
DG9263DY-E3 Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
DG9263DY-E3 Applications
There are a lot of Vishay Siliconix DG9263DY-E3 Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- 65 V DACs
- T1/E1 Terminals
- Cross Connects
- DSLAMs
- Private Branch Exchange (PBX)
- Central office
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Relay Replacement
- Medical
