LTC692IS8#PBF Overview
There are 8 terminals on this power management that allow it to be mounted. It is packaged with Tube. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 8. Power managment ic pin count is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 4.5V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. To find similar IC managements from the manufacturer, you can always search by LTC692. The power management must be powered by 5V volts to function properly.
LTC692IS8#PBF Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
LTC692IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC692IS8#PBF Voltage Supervisors applications.
- Power distribution systems of CCU
- Sensitive sensors
- Utility meter
- Stable power system
- Medical-specific insulation monitor
- Leakage protection
- Functional modules
- Telecommunications equipment
- Transformer load monitoring equipment
- Consumer electronics
