BU4311G-TR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a SC-74A, SOT-753 package. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In a 2.4V supply voltage, the power management conducts. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. A total of 5 pins are located on this power management. The pins of the power management system count 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 900mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 7V volts. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 550nA. It is always advisable to use BU43*, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.
BU4311G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
550nA operating supply current
BU4311G-TR Applications
There are a lot of ROHM Semiconductor BU4311G-TR Voltage Supervisors applications.
- WiFi router
- Refrigeration
- Consumer electronics
- Medical-specific isolation transformer
- Insulation fault location system
- emergency room
- DC stabilized power supply module
- Smart meter
- Precision measurement
- Important electronics for automotive safety
