AP1704DWG-7 Overview
As you can see, this power management is mounted through 3 terminals. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. Surface Mount is the one that mounts power management. Taking into account all of the pins, this power management has a total of 3. This power management system has 59 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. You should set the supervisor's temperature during 0°C~70°C TA . Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 30μA. A similar IC managements number of the manufacturer can always be found by using AP1704, the base power ics number. The power management can work with a maximum supply temperature of 30μA. On the power management, 1 inputs are monitored.
AP1704DWG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
30μA operating supply current
AP1704DWG-7 Applications
There are a lot of Diodes Incorporated AP1704DWG-7 Voltage Supervisors applications.
- Transformer load monitoring equipment
- Dash board
- Radio
- Automotive power systems
- Leakage current detection
- DC stabilized power supply module
- Personal computers
- Refrigeration
- Network equipment
- Unattended substation automation
