LT1641-1CS8#PBF Overview
The 8-SOIC (0.154, 3.90mm Width) package contains it.Hot-swappable device is currently possible to access 1 channels.There is a Tube-shaped package for it.There are 8 terminations in total.This device has a terminal position of DUAL.8 pins make up its total.High efficiency can be achieved when the supply voltage is 24V.Surface Mount sets it up.This electrical component belongs to the Hot Swap Controller classification.Hot-swappable device is recommended that the temperature is set to 0°C~70°C in order to ensure reliable performance.Devices with General Purpose applications are available.In Latched Fault, it is featured.As long as you have a 9V~80VV power source, it should work.LT1641 numbers belong to this family.Current Limit, Fault Timeout, OVP, Slew Rate, UVLO is the number of features it can be programmed with.Currently, 2mA is in short supply.In order for a device to operate normally, the supply voltage (Vsup) must be higher than 9V.There is a value of 80V set for Vsup (maximum supply voltage).Hot-swappable device has a 9/80V power supply, which is the power supply used in the part.There is a maximum supply current of 5.5mA for its operation.The same device can also be used to produce UNDERVOLTAGE LOCKOUT; OVERVOLTAGE PROTECTION.
LT1641-1CS8#PBF Features
The terminal position of 8
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
LT1641-1CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices
LT1641-1CS8#PBF hot swap controllers applications.
- Telecommunications
- Industrial
- Datacom
- Electric vehicle
- Avionics systems
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
