UCC3913D Overview
This is included in the 8-SOIC (0.154, 3.90mm Width) package.At present, 1 channels are available.It's packaged in a Tube shape.Total terminations are 8.Device position DUAL is its terminal position.In total, there are 8 pins on it.A supply voltage of 9.5V can result in high efficiency.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller.For reliable operation, set the temperature to 0°C~70°C.Application -48V is available on the device.As you can see in Auto Retry, UVLO, it's featured.There are numbers in the UCC3913 family that include it.8 pins are used in operation.There are Circuit Breaker, Current Limit, Fault Timeout features that can be programmed.In the present, there is a shortage of 1mA.Positioned in direction of Surface Mount, it is at a right angle.An output voltage of -10.5VV is its maximum.Hot Swap works wHot Swaph as low a voltage as possible, such as -9.999kVV.Hot Swap requires 20mA volts of current to operate.10V output voltage enables high efficiency.
UCC3913D Features
The terminal position of 8
Features of Auto Retry, UVLO
Programmable features of Circuit Breaker, Current Limit, Fault Timeout
Output voltage of 10V
UCC3913D Applications
There are a lot of Texas Instruments
UCC3913D hot swap controllers applications.
- Avionics systems
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
