LM5067MW-1/NOPB Overview
In the 14-SOIC (0.295, 7.50mm Width) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.The 14 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 14 pins.The supply voltage 13V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~125°C.Apps for -48V are available on the device.A feature of Latched Fault describes it.Using a -80V~-9VV power source should be able to power the device.The LM5067 family includes it.During operation, 14 pins are used.Hot-swappable device has Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO programmable features.As you can see, it is positioned in the direction of Surface Mount.Hot Swap is 2mA which is the operative supply current.With the help of this device, THRESHOLD VOLTAGE IS 8.4 VOLT can also be produced.
LM5067MW-1/NOPB Features
The terminal position of 14
Features of Latched Fault
Programmable features of Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO
LM5067MW-1/NOPB Applications
There are a lot of Texas Instruments
LM5067MW-1/NOPB hot swap controllers applications.
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
- Central office switching systems
