ADG819BRTZ-500RL7 Overview
Presented in SOT-23-6, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -40°C~125°C TA. Totally, there are 6 terminations. A high-quality output is provided by the electrical component's 1 channels. A total of 6 pins are injected into the electrical part body. A SPDT switching circuit is used for these analog switches. Using the ADG819 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 600mOhm. For details about the functions of 6 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 1.8V is the lowest voltage the electrical component should receive. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. Putting voltage greater than 2μA on the multiplexer may cause damage. The data can be transferred over a wide range of bandwidths, called 17MHz bandwidths. A Drain to Source resistance of 600mOhm is shown for this electronic part. In this digital multiplexer, there are 2 outputs.
ADG819BRTZ-500RL7 Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 17MHz
Drain-to-Source resistance: 600mOhm
ADG819BRTZ-500RL7 Applications
There are a lot of Analog Devices Inc.
ADG819BRTZ-500RL7 Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- New designs requiring multiplexer functions
- Cellular phones
