MAX4066ESD+ Overview
As the electronic part is packed in 14-SOIC (0.154, 3.90mm Width), international shipping is convenient. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 14. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. A key feature of the 14 series is the inclusion of this electronic part as part of its design. A SPST - NO switching circuit is used for these analog switches. The multiplexer consists of 4 circuits. Look for analog switch ic variants by searching with MAX4066. There is 45Ohm internal resistance in this digital multiplexer. Datasheets for functions of 14 pins are available. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16V. A analog switch ic that has a cost-effective Single supply type. There should be 2V voltage fed to the electrical part below 2V. This multiplexer would work with 1μA current. A voltage of 2V~16V is required for this switch device, which drains from a single voltage source. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
MAX4066ESD+ Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 100MHz
MAX4066ESD+ Applications
There are a lot of Maxim Integrated MAX4066ESD+ Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Channel Banks
- Transmit
- Frame Relay Equipment
- Remote wireless modules
- ATM
- SDH
- Medical systems
- New designs requiring multiplexer functions
- SONET/SDH ADM
