Name: ADG715BRU-REEL7
Brand: Hotenda
SKU: ADG715BRU-REEL7
Availability: InStock

new-10%

ADG715BRU-REEL7

Manufacturer part number:ADG715BRU-REEL7

Manufacturer:Hotenda

Description:20ns, 8ns (Typ) SPST - NO 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG715 24 Pins 100pA 2.5V 24-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG715BRU-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	24-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	24
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Resistance	4.5Ohm
Additional Feature	ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	125μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	8
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG715
Output	SEPARATE OUTPUT
Pin Count	24
Qualification Status	Not Qualified
Power Supplies	3/5/+-3V
Number of Channels	1
Interface	Serial
Number of Circuits	8
Max Supply Voltage	5.5V
Min Supply Voltage	2.75V
Operating Supply Current	10μA
Power Dissipation	125μW
Max Supply Current	20μA
Throw Configuration	SPST
Turn On Delay Time	140 ns
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±2.5V
Supply Type	Dual, Single
Bandwidth	155MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	2.75V
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	2.25V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF 11pF
On-state Resistance Match-Nom	0.4Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	20ns, 8ns (Typ)
Charge Injection	3pC
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	200ns
Switch-off Time-Max	190ns
Normal Position	NC
Height Seated (Max)	1.2mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG715BRU-REEL7 Product Details

ADG715BRU-REEL7 Overview

Packed in 24-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Around -40°C~85°C TA is the extended operating temperature. A total of 24 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 2.5V volts, the electrical component should be turned on and run. This electrical component is included in the 24 series of products. Unlike digital switches, these are based on SPST - NO switching circuits. The multiplexer consists of 8 circuits. Using the ADG715 search parameter, you can discover variants of the switch. A 4.5Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 24 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended to use 2.75V as the lowest voltage for the electrical part. An operating current of 10μA would be sufficient for this switch device. A digital multiplexer may suffer damage if voltage is applied above 20μA. For this switch, a dual supply voltage is feasible, but it must not exceed 2.75VWhen using dual power supplies, you should attach at least 2.25V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. The data can be transferred over a wide range of bandwidths, called 155MHz bandwidths. There is also ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY to look out for in this electronic part.