Name: MAX4801CQI+
Brand: Maxim Integrated
SKU: MAX4801CQI+
Availability: InStock

new-10%

MAX4801CQI+

Manufacturer part number:MAX4801CQI+

Manufacturer:Maxim Integrated

Description:5μs, 5μs SPST - NO 38Ohm QUAD Analog Switches MAX4801 28 Pins 4μA 3V 28-LCC (J-Lead)

Case Package:SOT-23

Datasheet:MAX4801CQI+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
Resistance	38Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	BCDMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	1.27mm
Base Part Number	MAX4801
Pin Count	28
Operating Supply Voltage	12V
Power Supplies	3/13V
Number of Channels	1
Number of Circuits	8
Max Supply Voltage	13.2V
Min Supply Voltage	2.7V
Throw Configuration	SPST
Turn On Delay Time	5 ns
Supply Type	Single
Turn-Off Delay Time	5 ns
On-State Resistance (Max)	38Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	77 dB
Current - Leakage (IS(off)) (Max)	4μA
Channel Capacitance (CS(off), CD(off))	18pF
On-state Resistance Match-Nom	7.6Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	5μs, 5μs
Charge Injection	820pC
Channel-to-Channel Matching (ΔRon)	1.9 Ω
Crosstalk	-80dB @ 5MHz
Switch-on Time-Max	5000ns
Switch-off Time-Max	5000ns
Voltage - Supply, Single (V+)	2.7V~13.2V
Normal Position	NO
Height Seated (Max)	4.57mm
Length	11.505mm
Width	11.505mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4801CQI+ Product Details

MAX4801CQI+ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 28-LCC (J-Lead). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 28 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. There are 28 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. A total of 8 circuits make up this switch device. Search with MAX4801 if you are looking for analog multiplexer variants. It has an internal resistance of 38Ohm. The functions of 28 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 13.2V volts for the multiplexer. Single supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. A voltage of 2.7V~13.2V is required to drain this analog switch from a single voltage supply. There is a voltage range of 12V operating voltages for the electrical part.