Name: DG9461DY-T1
Brand: Vishay Siliconix
SKU: DG9461DY-T1
Availability: InStock

new-10%

DG9461DY-T1

Manufacturer part number:DG9461DY-T1

Manufacturer:Vishay Siliconix

Description:75ns, 50ns SPDT 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 8 Pins 100pA 3V 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG9461DY-T1 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	540.001716mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	60Ohm
Terminal Finish	TIN LEAD
Subcategory	Multiplexer or Switches
Max Power Dissipation	400mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	3V
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	8
Number of Outputs	2
Qualification Status	Not Qualified
Power Supplies	3/5V
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Power Dissipation	400mW
Max Supply Current	1μA
Turn On Delay Time	75 ns
Number of Inputs	1
Supply Type	Single
Turn-Off Delay Time	50 ns
On-State Resistance (Max)	60Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	74 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	7pF
On-state Resistance Match-Nom	0.4Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	75ns, 50ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	400m Ω
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2.7V~5V
Height	1.55mm
Length	5mm
Width	4mm
RoHS Status	Non-RoHS Compliant

DG9461DY-T1 Product Details

DG9461DY-T1 Overview

Shipping overseas is convenient with the electronic component packed in 8-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 8. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. The electronic part body is injected with 8 pins. A SPDT switching circuit is used to build these analog multiplexers. There is 60Ohm internal resistance in this digital multiplexer. For functions related to 8 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 12V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 2.7V should be the lowest voltage fed to the electronic component. This analog switch requires a voltage of 2.7V~5V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. It is possible to operate 1 inputs. The analogue multiplexer has 2 outputs.