Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG714BRUZ

ADG714BRUZ

ADG714BRUZ

Hotenda

20ns, 8ns (Typ) SPST - NO 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG714 24 Pins 100pA 2.5V 24-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG714BRUZ Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Factory Lead Time 16 Weeks
Lifecycle Status PRODUCTION (Last Updated: 3 months ago)
Contact PlatingTin
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Surface MountYES
Number of Pins 24
Operating Temperature-40°C~85°C TA
PackagingTube
JESD-609 Code e3
Pbfree Code no
Part StatusActive
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
ECCN Code EAR99
Resistance 4.5Ohm
Additional FeatureALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation125μW
Technology CMOS
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 8
Supply Voltage 2.5V
Terminal Pitch0.65mm
[email protected] Reflow Temperature-Max (s) 40
Base Part Number ADG714
Pin Count24
Power Supplies3/5/+-3V
Number of Channels 8
Interface Serial
Max Supply Voltage5.5V
Min Supply Voltage2.7V
Nominal Supply Current20μA
Power Dissipation125μW
Max Supply Current 20μA
Throw Configuration SPST
Turn On Delay Time32 ns
Voltage - Supply, Single/Dual (±) 2.7V~5.5V ±2.5V
Supply Type Dual, Single
Bandwidth 155MHz
Neg Supply Voltage-Nom (Vsup) -2.5V
Turn-Off Delay Time 15 ns
Max Dual Supply Voltage2.75V
On-State Resistance (Max) 4.5Ohm
Min Dual Supply Voltage 2.25V
High Level Output Current30mA
Dual Supply Voltage 2.5V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 60 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 11pF 11pF
On-state Resistance Match-Nom 0.4Ohm
Switch CircuitSPST - NO
Switch Time (Ton, Toff) (Max) 20ns, 8ns (Typ)
Charge Injection3pC
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Drain to Source Resistance 4.5Ohm
Normal Position NC
Signal Current-Max 0.1A
Height 1.05mm
Length 7.8mm
Width 4.4mm
Radiation HardeningNo
REACH SVHC No SVHC
RoHS StatusROHS3 Compliant
Lead Free Contains Lead
In-Stock:1176 items

Pricing & Ordering

QuantityUnit PriceExt. Price
1$3.700331$3.700331
10$3.490878$34.90878
100$3.293281$329.3281
500$3.106869$1553.4345
1000$2.931009$2931.009

ADG714BRUZ Product Details

ADG714BRUZ Overview


The electronic part can be shipped overseas conveniently because it is packaged in 24-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. In total, 24 terminations have occurred. The electronic part delivers high-quality output through its 8 channels. With a 2.5V voltage supply, the electrical component should be turned on and run. As part of its design, the 24 series is equipped with this electronic component. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching with ADG714 to find analog multiplexer variants. There is 4.5Ohm internal resistance in this digital multiplexer. The datasheets for the 24 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 2.7V. A digital multiplexer may suffer damage if voltage is applied above 20μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 2.75V. If you are using dual power supplies, you should attach at least 2.25V. It is possible to transfer data over a 155MHz-bandwidth. Additional features include: ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY. It has a Drain to Source resistance of 4.5Ohm ohms.

ADG714BRUZ Features


8 Channels
Switch Circuit: SPST - NO
Bandwidth: 155MHz
Additional Features: ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY
Drain-to-Source resistance: 4.5Ohm

ADG714BRUZ Applications


There are a lot of Analog Devices Inc. ADG714BRUZ Analog Switches & Multiplexers ICs applications.

  • Audio signal routing
  • DSLAMs
  • Multiplexers
  • Cell phones
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Audio/video switches
  • Access Concentrators
  • PCMCIA cards
  • Microwave transmission systems
  • Communications systems

Get Subscriber

Enter Your Email Address, Get the Latest News