Name: MAX361ESE
Brand: Maxim Integrated
SKU: MAX361ESE
Price: 4.07000 USD
Availability: InStock

new-10%

MAX361ESE

Manufacturer part number:MAX361ESE

Manufacturer:Maxim Integrated

Description:250ns, 120ns SPST - NC 85Ohm Analog Switches BREAK-BEFORE-MAKE MAX361 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:MAX361ESE Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2004
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	85Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Base Part Number	MAX361
Output	SEPARATE OUTPUT
Pin Count	16
JESD-30 Code	R-PDSO-G16
Operating Supply Voltage	20V
Power Supplies	+-15V
Number of Channels	1
Voltage	44V
Number of Circuits	4
Max Supply Voltage	30V
Min Supply Voltage	10V
Nominal Supply Current	15μA
Max Supply Current	15μA
Throw Configuration	SPST
Turn On Delay Time	250 ns
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	120 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	85Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	4pF 4pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	250ns, 120ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX361ESE Product Details

MAX361ESE Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. The operating temperature is extended to around -40°C~85°C TA. A total of 16 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. Based on SPST - NC switching circuits, these analog multiplexers work. This multiplexer is composed of 4 circuits. Using the MAX361 search parameter, you can discover variants of the switch. An switch multiplexer with 85Ohm internal resistance has a value of 85Ohm. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 30V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Dual, Single supply type. The lowest voltage fed to the electronic component should be 10V. Put voltage above 15μA on the multiplexer to cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. The voltage should be at least 4.5V if you are using dual power supplies. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. A voltage of 20V can be used to operate the electronic component.