Name: ADG5423BRMZ-RL7
Brand: Hotenda
SKU: ADG5423BRMZ-RL7
Price: 3.49000 USD
Availability: InStock

new-10%

ADG5423BRMZ-RL7

Manufacturer part number:ADG5423BRMZ-RL7

Manufacturer:Hotenda

Description:199ns, 184ns SPST - NO 14Ohm Analog Switches BREAK-BEFORE-MAKE ADG5423 10 Pins 250pA 15V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:ADG5423BRMZ-RL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Weight	143.193441mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	14Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG5423
Output	SEPARATE OUTPUT
Pin Count	10
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	40V
Min Supply Voltage	9V
Test Frequency	1MHz
Max Supply Current	55μA
Turn On Delay Time	220 ns
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	196 ns
Max Dual Supply Voltage	22V
-3db Bandwidth	250MHz
On-State Resistance (Max)	14Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	11pF 12pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	199ns, 184ns
Insertion Loss (dB)	0.8 dB
Charge Injection	120pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	370ns
Height Seated (Max)	1.1mm
Length	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5423BRMZ-RL7 Product Details

ADG5423BRMZ-RL7 Overview

The electrical component comes in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. There are 10 terminations totally. A 1 channel electronic part produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 10 pins. Multiplexers built on a SPST - NO switching circuit are built. It consists of 2 circuits. Try searching for the analog switch ic with ADG5423 if you are looking for variants. It has an internal resistance of 14Ohm. For functions related to 10 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 40V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 9V. If put voltage greater than 55μA on the device, damage may be caused to the analogue multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 22V. In the case of dual power supplies, you should connect at least 9V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.