Name: ADG452BRZ-REEL7
Brand: Hotenda
SKU: ADG452BRZ-REEL7
Price: 7.01000 USD
Availability: InStock

new-10%

ADG452BRZ-REEL7

Manufacturer part number:ADG452BRZ-REEL7

Manufacturer:Hotenda

Description:180ns, 140ns SPST - NO 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG452 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ADG452BRZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	5Ohm
Additional Feature	ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	17.5μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG452
Pin Count	16
Operating Supply Voltage	9V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	12V
Min Supply Voltage	5V
Operating Supply Current	100pA
Power Dissipation	17.5μW
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	180 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	140 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	5Ohm
Min Dual Supply Voltage	5V
High Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Neg Supply Voltage-Max (Vsup)	-20V
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	37pF 37pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	180ns, 140ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	220ns
Normal Position	NO
Voltage - Supply, Dual (V±)	±4.5V~20V
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG452BRZ-REEL7 Product Details

ADG452BRZ-REEL7 Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 4 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Try searching with ADG452 if you're looking for variants. There is 5Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 12V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 100pA current would be sufficient. The analogue multiplexer may be damaged if voltage is greater than 500nA. If put voltage greater than 15V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 5V. 9V operating voltages are supported by the electronic component. Additional features of the electronic component include: ALSO OPERATE WITH 12V SINGLE SUPPLY.