Name: ADG417BRZ
Brand: Hotenda
SKU: ADG417BRZ
Price: 4.16000 USD
Availability: InStock

new-10%

ADG417BRZ

Manufacturer part number:ADG417BRZ

Manufacturer:Hotenda

Description:160ns, 100ns SPST - NC 35Ohm Analog Switches BREAK-BEFORE-MAKE ADG417 8 Pins 250pA 15V 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ADG417BRZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	35Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	400mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG417
Pin Count	8
Operating Supply Voltage	9V
Polarity	Inverting, Non-Inverting
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	5V
Operating Supply Current	100pA
Power Dissipation	35μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	160 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	100 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	5V
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	6pF 6pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	160ns, 100ns
Charge Injection	7pC
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	25Ohm
Normal Position	NC
Voltage - Supply, Dual (V±)	±15V
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG417BRZ Product Details

ADG417BRZ Overview

Packed in 8-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -40°C~85°C TA. There are 8 terminations totally. By its 1 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. 8 pins are injected to the electronic part body. These analog multiplexers are built based on SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with ADG417. This digital multiplexer has 35Ohm internal resistance. Please refer to the datasheets for 8 pins functions. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 5V. 100pA current would be enough for this multiplexer to operate. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 15V. You should attach at least 5V voltage if you are using dual power supply. The electronic component can function from 9V. This electronic component presents a Drain to Source resistance of 25Ohm.