Name: DG202BDY-T1-E3
Brand: Vishay Siliconix
SKU: DG202BDY-T1-E3
Price: 2.88000 USD
Availability: InStock

new-10%

DG202BDY-T1-E3

Manufacturer part number:DG202BDY-T1-E3

Manufacturer:Vishay Siliconix

Description:300ns, 200ns SPST - NO 85Ohm Analog Switches DG202 500pA 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG202BDY-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	13 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Supplier Device Package	16-SOIC
Weight	665.986997mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Termination	SMD/SMT
Resistance	85Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Max Power Dissipation	640mW
Base Part Number	DG202
Number of Outputs	4
Number of Channels	4
Number of Circuits	4
Max Supply Voltage	25V
Min Supply Voltage	4.5V
Operating Supply Current	50μA
Nominal Supply Current	50μA
Power Dissipation	640mW
Max Supply Current	50μA
Throw Configuration	SPST
Turn On Delay Time	300 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	4.5V~25V ±4.5V~22V
Supply Type	Dual, Single
Turn-Off Delay Time	200 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	85Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	300ns, 200ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	2Ohm
Crosstalk	-95dB @ 100kHz
Drain to Source Resistance	85Ohm
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG202BDY-T1-E3 Product Details

DG202BDY-T1-E3 Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. A 4 channel electronic part produces high-quality output. Unlike digital switches, these are based on SPST - NO switching circuits. 4 circuits are used in this analogue multiplexer. Try searching for DG202 variants of the analog switch ic. Analog switches have 85Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. Users should never supply a voltage higher than 25V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 4.5V voltage fed to the electrical part below 4.5V. It would be sufficient to run this analogue multiplexer with 50μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 50μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. The voltage should be at least 4.5V if you are using dual power supplies. In order to operate the 4 inputs, there are several steps to follow. Temperatures higher than 85°C are not recommended for operation of the analogue multiplexer. Resistivity from Drain to Source is 85Ohm for this electronic part. Multiplexer ics with 4 outputs are available. Suppliers are offering a 16-SOIC package.