74VHC4053AFT Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 2 channels. A 3V voltage supply should turn on and run the electronic component. These analog multiplexers are built based on SPDT switching circuits. A total of 3 circuits make up this switch device. 74VHC4053 can be used to search for analog multiplexer variants. There is 37Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. There should be 2V voltage fed to the electrical part below 2V. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module.
74VHC4053AFT Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 280MHz
74VHC4053AFT Applications
There are a lot of Toshiba Semiconductor and Storage 74VHC4053AFT Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- Imaging
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Relay replacements
- Communication systems
- PDAs
- Modems
- Avionics and Military Systems
- Data Acquisition Systems
- Video switching
