Name: ADG1409YRUZ
Brand: Hotenda
SKU: ADG1409YRUZ
Price: 9.08000 USD
Availability: InStock

new

ADG1409YRUZ

Manufacturer part number:ADG1409YRUZ

Manufacturer:Hotenda

Description:120ns, 120ns SP4T 4.7Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1409 16 Pins 200pA 5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG1409YRUZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.9mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1409
Pin Count	16
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	1μA
Power Dissipation	4.9mW
Throw Configuration	4PST
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Bandwidth	115MHz
Supply Current-Max (Isup)	0.001mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	100 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	4.7Ohm
Min Dual Supply Voltage	4.5V
High Level Output Current	30mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	200pA
Channel Capacitance (CS(off), CD(off))	14pF 40pF
On-state Resistance Match-Nom	0.78Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	120ns, 120ns
Charge Injection	-50pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	330ns
Signal Current-Max	0.03A
Height	1.05mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1409YRUZ Product Details

ADG1409YRUZ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operation at a temperature around -40°C~125°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There is an electrical component included in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. The multiplexer consists of 2 circuits. Look for analog switch ic variants by searching with ADG1409. An switch multiplexer with 4Ohm internal resistance has a value of 4Ohm. Datasheets for 16 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. There should be 5V voltage fed to the electrical part below 5V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. For dual power supplies, a voltage of at least 4.5V should be attached. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. 12V operating voltages are supported by the electronic component. Operating 8 inputs is required. The transfer of data can be performed over 115MHz bandwidths.