Name: NLAS4053DR2G
Brand: ON Semiconductor
SKU: NLAS4053DR2G
Price: 0.88000 USD
Availability: InStock

new-10%

NLAS4053DR2G

Manufacturer part number:NLAS4053DR2G

Manufacturer:ON Semiconductor

Description:23ns, 23ns SPDT 26Ohm Analog Switches BREAK-BEFORE-MAKE NLAS4053 16 Pins 100nA 3V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:NLAS4053DR2G Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	33Ohm
Terminal Finish	Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	3V
Terminal Pitch	1.27mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	NLAS4053
Pin Count	16
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	5.5V
Min Supply Voltage	2.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	40μA
Power Dissipation	500mW
Throw Configuration	DPST
Propagation Delay	40 ns
Turn On Delay Time	40 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	3V~5V ±3V
Halogen Free	Halogen Free
Supply Type	Dual, Single
Bandwidth	145MHz
Supply Current-Max (Isup)	0.08mA
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	40 ns
Max Dual Supply Voltage	3.3V
-3db Bandwidth	180MHz
On-State Resistance (Max)	26Ohm
Min Dual Supply Voltage	1.25V
Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	93 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	23ns, 23ns
Charge Injection	12pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	28ns
Switch-off Time-Max	28ns
Signal Current-Max	0.05A
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

NLAS4053DR2G Product Details

NLAS4053DR2G Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Around -55°C~125°C TA is the extended operating temperature. The total number of terminations is 16. The electronic part delivers high-quality output through its 2 channels. A 3V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. A SPDT switching circuit is used for these analog switches. This multiplexer is composed of 3 circuits. Search with NLAS4053 if you are looking for analog multiplexer variants. Analog switches have 33Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.5V. The switch device would be able to operate with 40μA current. Despite this switch's dual supply capability, its voltage should not exceed 3.3V. If you are using a dual power supply, you should attach at least 1.25V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. A 6 input needs to be operated. 145MHz-bandwidths can be used to transfer data between multiplexers.