Name: ADG1312YRUZ
Brand: Hotenda
SKU: ADG1312YRUZ
Price: 3.60000 USD
Availability: InStock

new-10%

ADG1312YRUZ

Manufacturer part number:ADG1312YRUZ

Manufacturer:Hotenda

Description:125ns, 50ns SPST - NO 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1312 16 Pins 10nA 15V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG1312YRUZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~105°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.8mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1312
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	4.8mW
Max Supply Current	380μA
Throw Configuration	SP8T
Turn On Delay Time	125 ns
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Bandwidth	600MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	125ns, 50ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	180ns
Switch-off Time-Max	60ns
Drain to Source Resistance	130Ohm
Height	1.2mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1312YRUZ Product Details

ADG1312YRUZ Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~105°C TA extended. In total, 16 terminations have occurred. A electrical component with 4 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Look for analog switch ic variants by searching with ADG1312. A 200Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 5V as the lowest voltage for the electrical part. A voltage higher than 380μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VFor dual power supplies, a voltage of at least 5V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. This electrical part is compatible with 12V operating voltages. It is possible to transfer data over a 600MHz-bandwidth. There is 130Ohm Drain to Source resistance on this electronic part.