Name: ADG512BRZ-REEL7
Brand: Hotenda
SKU: ADG512BRZ-REEL7
Price: 9.44000 USD
Availability: InStock

new

ADG512BRZ-REEL7

Manufacturer part number:ADG512BRZ-REEL7

Manufacturer:Hotenda

Description:200ns, 120ns (Typ) SPST - NO 30Ohm Typ Analog Switches BREAK-BEFORE-MAKE ADG512 16 Pins 100pA 5V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ADG512BRZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	30Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG512
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Operating Supply Current	100pA
Power Dissipation	10μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	375 ns
Voltage - Supply, Single/Dual (±)	3V~5.5V ±4.5V~5.5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	30Ohm Typ
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	200ns, 120ns (Typ)
Charge Injection	11pC
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Height	1.75mm
Length	10mm
Width	4mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG512BRZ-REEL7 Product Details

ADG512BRZ-REEL7 Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. A electrical component with 4 channels is capable of high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. This electrical component is included in the 16 series of products. These analog multiplexers are built based on SPST - NO switching circuits. Try searching for the analog switch ic with ADG512 if you are looking for variants. Analog switches have 30Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. A analog switch ic that has a cost-effective Dual, Single supply type. 4.5V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 100pA. The analogue multiplexer may be damaged if voltage is greater than 1μA. Despite this switch's dual supply capability, its voltage should not exceed 5.5V. It is recommended that you attach at least 4.5V to your dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. There is a voltage range of 5V operating voltages for the electrical part.