Name: ADG1421BCPZ-REEL7
Brand: Hotenda
SKU: ADG1421BCPZ-REEL7
Price: 5.17000 USD
Availability: InStock

new-10%

ADG1421BCPZ-REEL7

Manufacturer part number:ADG1421BCPZ-REEL7

Manufacturer:Hotenda

Description:145ns, 145ns SPST - NO 2.4Ohm Analog Switches BREAK-BEFORE-MAKE ADG1421 10 Pins 500pA 5V 10-VFDFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG1421BCPZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	10-VFDFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	10
ECCN Code	EAR99
Resistance	2.4Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.8mW
Technology	CMOS
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1421
Pin Count	10
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	1.8mW
Max Supply Current	190μA
Turn On Delay Time	145 ns
Number of Inputs	2
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	2.4Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	18pF 22pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	145ns, 145ns
Insertion Loss (dB)	0.12 dB
Charge Injection	-5pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Crosstalk	-74dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	395ns
Normal Position	NO
Height Seated (Max)	0.8mm
Length	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1421BCPZ-REEL7 Product Details

ADG1421BCPZ-REEL7 Overview

This electronic part is conveniently packaged in 10-VFDFN Exposed Pad, CSP, making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 10 terminations. A 1 channel electronic part produces high-quality output. A 5V voltage supply should turn on and run the electronic component. An injection of 10 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for ADG1421 variants of the analog switch ic. Analog switches have 2.4Ohm internal resistance. To find out what the 10 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 16.5V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 5V voltage fed to the electrical part below 5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 190μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. The voltage should be at least 4.5V if you are using dual power supplies. Operating voltages of 12V are compatible with the electrical part. In order to operate the 2 inputs, there are several steps to follow. In 180MHz-bandwidths, data can be transferred.