Name: ADG1236YCPZ-REEL7
Brand: Hotenda
SKU: ADG1236YCPZ-REEL7
Price: 6.18000 USD
Availability: InStock

new-10%

ADG1236YCPZ-REEL7

Manufacturer part number:ADG1236YCPZ-REEL7

Manufacturer:Hotenda

Description:150ns, 90ns SPDT 190Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1236 12 Pins 100pA 15V 12-WFQFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG1236YCPZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Mounting Type	Surface Mount
Package / Case	12-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	12
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	12
ECCN Code	EAR99
Resistance	190Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	3.5mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADG1236
Pin Count	12
Number of Outputs	4
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	2
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	170μA
Power Dissipation	3.5mW
Max Supply Current	230μA
Turn On Delay Time	150 ns
Supply Type	Dual, Single
Bandwidth	1 GHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	90 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.6pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	150ns, 90ns
Charge Injection	-1pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Dual (V±)	±15V
Height Seated (Max)	1mm
Length	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1236YCPZ-REEL7 Product Details

ADG1236YCPZ-REEL7 Overview

Shipping overseas is convenient with the electronic component packed in 12-WFQFN Exposed Pad, CSP. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 2:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~125°C TA. In total, there are 12 terminations. The electronic part delivers high-quality output through its 2 channels. A 15V voltage supply should turn on and run the electronic component. Electronic part bodies are injected with 12 pins. A SPDT switching circuit is used to build these analog multiplexers. Try searching with ADG1236 if you're looking for variants. A 190Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 12 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 5V should be the lowest voltage fed to the electronic component. 170μA current would be enough for this multiplexer to operate. It may damage the digital multiplexer if the voltage is higher than 230μA. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. With dual power supplies, you should attach at least 5V. 12V operating voltages are supported by the electronic component. 1 GHz bandwidths enable data to be transferred. A analog switch ics with 4 outputs is included.