Name: MAX4626EUK+T
Brand: Maxim Integrated
SKU: MAX4626EUK+T
Price: 3.79000 USD
Availability: InStock

new-10%

MAX4626EUK+T

Manufacturer part number:MAX4626EUK+T

Manufacturer:Maxim Integrated

Description:50ns, 30ns SPST - NO 500mOhm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4626 5 Pins 2nA 3V SC-74A, SOT-753

Case Package:SOT-23

Datasheet:MAX4626EUK+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Weight	29.993795mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2000
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Resistance	500mOhm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	571mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	MAX4626
Pin Count	5
Operating Supply Voltage	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	10μA
Nominal Supply Current	10μA
Max Supply Current	10μA
Throw Configuration	SPST
Turn On Delay Time	50 ns
Supply Type	Single
Turn-Off Delay Time	30 ns
On-State Resistance (Max)	500mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	51 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	65pF 65pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	50ns, 30ns
Charge Injection	40pC
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	500mOhm
Normal Position	NO
Height	1.1mm
Length	2.9mm
Width	1.63mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX4626EUK+T Product Details

MAX4626EUK+T Overview

Due to its SC-74A, SOT-753 packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. 5 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 5 pins. The analog switch ics are built using SPST - NO switching circuits. Look for analog switch ic variants by searching with MAX4626. A 500mOhm internal resistance characterizes this multiplexer. To find out what the functions of 5 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The digital multiplexer has a low cost Single supply. There should be 1.8V voltage fed to the electrical part below 1.8V. In order to operate this switch device, it would need a current of 10μA. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 10μA. 5V operating voltages can be used with this electrical part. It has a Drain to Source resistance of 500mOhm ohms.