Name: ADG1309BRUZ
Brand: Hotenda
SKU: ADG1309BRUZ
Price: 4.94000 USD
Availability: InStock

new-10%

ADG1309BRUZ

Manufacturer part number:ADG1309BRUZ

Manufacturer:Hotenda

Description:100ns, 100ns SP4T 210Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1309 16 Pins 1nA 15V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG1309BRUZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~105°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	210Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1309
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	4
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	220μA
Throw Configuration	4PST
Turn On Delay Time	120 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Bandwidth	500MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	210Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	10pF 15pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	100ns, 100ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	130Ohm
Signal Current-Max	0.03A
Height	1.05mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1309BRUZ Product Details

ADG1309BRUZ Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 4:1. Operational temperature extended around -40°C~105°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 4 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 16 series. These analog multiplexers are built based on SP4T switching circuits. The circuits in this analogue multiplexer number 2. Try searching with ADG1309 if you're looking for variants. In this multiplexer, the internal resistance is 210Ohm. Datasheets for 16 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. The lowest voltage the electronic part should receive is 5V. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. The voltage should be at least 5V if you are using dual power supplies. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. There is a voltage range of 15V operating voltages for the electrical part. Among the inputs that can be operated are the 8 inputs. There are 500MHz bandwidths for data transfer. Drain to Source resistance is 130Ohm.