Name: ADG1223BRMZ-REEL7
Brand: Hotenda
SKU: ADG1223BRMZ-REEL7
Price: 4.30000 USD
Availability: InStock

new-10%

ADG1223BRMZ-REEL7

Manufacturer part number:ADG1223BRMZ-REEL7

Manufacturer:Hotenda

Description:130ns, 105ns SPST - NO/NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1223 10 Pins 100pA 15V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:ADG1223BRMZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.3mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1223
Output	SEPARATE OUTPUT
Pin Count	10
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	140μA
Power Dissipation	2.9mW
Max Supply Current	190μA
Throw Configuration	SPST
Turn On Delay Time	170 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Supply Type	Dual, Single
Bandwidth	960MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	105 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2.2pF 2.2pF
On-state Resistance Match-Nom	2.5Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	130ns, 105ns
Charge Injection	0.1pC
Channel-to-Channel Matching (ΔRon)	2.5 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	140ns
Height Seated (Max)	1.1mm
Length	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1223BRMZ-REEL7 Product Details

ADG1223BRMZ-REEL7 Overview

Presented in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. In total, there are 10 terminations. By its 1 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. As part of its design, the 10 series is equipped with this electronic component. The analog switch ics are built using SPST - NO/NC switching circuits. Circuits number 2 make up this analogue multiplexer. Use ADG1223 to search for variants of the digital switches. In this multiplexer, the internal resistance is 200Ohm. To find out what the 10 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 5V. For this multiplexer to operate, 140μA current would be sufficient. If you put voltage higher than 190μA on the digital multiplexer, damage may occur. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 5V. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. 12V operating voltages are supported by the electronic component. In 960MHz-bandwidths, data can be transferred.