DG412EUE+T Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 16 terminations. Multiplexers built on a SPST - NO switching circuit are built. A total of 4 circuits make up this switch device. Try searching with DG412 to find analog multiplexer variants. An switch multiplexer with 80Ohm internal resistance has a value of 80Ohm. Please refer to the datasheets for 16 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 30V volts for the multiplexer. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 10V. This digital switch can be operated with a current of 100pA. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. There is no problem with using dual supply voltage, but it should not exceed 20V. With dual power supplies, you should attach at least 4.5V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The electrical part can be operated at 28V voltage levels.
DG412EUE+T Features
Switch Circuit: SPST - NO
100pA Supply Current
DG412EUE+T Applications
There are a lot of Maxim Integrated DG412EUE+T Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- 65 V DACs
- Switching Systems
- Transmit
- Public switching systems
- Precision test equipment
- Audio/video switches
- Cable PC
- Medical Instrumentation
- CSU
