MAX4645EUT-T Overview
Shipping overseas is convenient due to the electrical component's packing in SOT-23-6. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 6. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. The electrical component body receives 6 pins. The analog switch ics are built using SPST - NO switching circuits. 1 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with MAX4645 if you are looking for variants. The internal resistance of this digital multiplexer is 2.5Ohm. The datasheets for the 6 pins explain the functions. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analog switch ics with Single supply type are cost-effective. 1.8V is the lowest voltage the electrical component should receive. For this multiplexer to operate, 100pA current would be sufficient. A voltage of 1.8V~5V is required to drain this analog switch from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Operating voltages of 5V are compatible with the electrical part.
MAX4645EUT-T Features
1 Channels
Switch Circuit: SPST - NO
100pA Supply Current
MAX4645EUT-T Applications
There are a lot of Maxim Integrated MAX4645EUT-T Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Sample hold systems
- Routers
- T1/E1 Terminals
- Cable PC
- Audio and video routing
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Cross Connects
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Avionics test equipment
