Name: ADG1222BRMZ
Brand: Hotenda
SKU: ADG1222BRMZ
Price: 4.30000 USD
Availability: InStock

new-10%

ADG1222BRMZ

Manufacturer part number:ADG1222BRMZ

Manufacturer:Hotenda

Description:130ns, 105ns SPST - NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1222 10 Pins 100pA 15V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:ADG1222BRMZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.3mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG1222
Output	SEPARATE OUTPUT
Pin Count	10
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	2.9mW
Max Supply Current	190μA
Turn On Delay Time	170 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Supply Type	Dual, Single
Bandwidth	960MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	105 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2.2pF 2.2pF
On-state Resistance Match-Nom	2.5Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	130ns, 105ns
Charge Injection	0.1pC
Channel-to-Channel Matching (ΔRon)	2.5 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	140ns
Drain to Source Resistance	120Ohm
Height	850μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1222BRMZ Product Details

ADG1222BRMZ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -40°C~125°C TA. In total, there are 10 terminations. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. This electrical component is included in the 10 series of products. Based on SPST - NC switching circuits, these analog multiplexers work. There are 2 circuits in this multiplexer. Using the ADG1222 search parameter, you can discover variants of the switch. This digital multiplexer has 200Ohm internal resistance. For details about the functions of 10 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Dual, Single supply type. 5V should be the lowest voltage fed to the electronic component. If you put voltage higher than 190μA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. In the case of dual power supplies, you should connect at least 5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. A voltage of 12V can be used to operate the electronic component. This switch operates within the bandwidth of 960MHz. Drain to Source resistance for this electronic component is 120Ohm.