AD9901KPZ-REEL Overview
As a clock IC, it uses the Tape & Reel (TR) package. Clock PLL is embedded in the 20-LCC (J-Lead) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 20 terminations can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 5V. This clock generator receives its inputs from CMOS, ECL, TTL, which is designed to be the clock source. For full access to the electronic component's capabilities, 1 circuits are implemented. It provides a maximum frequency of 200MHz. This component can be conveniently installed on the panel thanks to the Surface Mount. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. In this case, we are dealing with a frequency synthesizer that can be used with CMOS, ECL, TTL logic levels. This electronic component is usually classified as a Digital Phase/Frequency Discriminator component. Microprocessors are specifically designed to use this clock-generating IC, which has a 20-bit output. The related electronic parts of part number AD9901 are listed below. It is possible to connect to the PLL via 20 pins. Time clock generator can handle a voltage of 5V as the supply voltage. This clock generator can be classified as a kind of PLL or Frequency Synthesis Circuits in general. The RF synthesizer features ALSO OPERATES AT -5.2 V SUPPLY for improved clock signal output. To fully perform its function, time clock generator requires a supply current of 54mA.
AD9901KPZ-REEL Features
Available in the 20-LCC (J-Lead)
Supply voltage of 5V
Operating supply voltage of 5V
AD9901KPZ-REEL Applications
There are a lot of Analog Devices Inc. AD9901KPZ-REEL Clock Generators applications.
- Antenna automatic tracking
- Threshold extension
- Jitter reduction
- Radiotelephones
- Microwave point-to-point systems
- Local oscillator source in receiver
- Local oscillators (LOs)
- Clock synchronization
- Microwave backhaul IF
- Picocells, femtocells and small cells
