XC1765EPC20I Overview
FPGA uses a nice 20-LCC (J-Lead) package that makes FPGA easy to use.Packaging outside of Tube.In the state of -40°C~85°C, licensed to work.With the help of OTP, it can be programmed.A voltage of 4.5V~5.5V is applied to it.FPGA is mounted in Surface Mount.There is a limit of 65kb MB for the amount of data that can be stored.You can search "XC1765E" for other related parts.The supply voltage of the device must be 5V in order to operate correctly.Different types of 20 terminations are available with different functions.This memory device can be used with a maximum voltage of 5.5V.An operating voltage of 4.5V is required in order to supply the device.Using CONFIGURATION MEMORY memory chips, this is what you get.If reflow soldering is being performed, the temperature should not be higher than 225 when soldering should be reflowed.In this case, it has 20 pins.A SERIAL-processing method is used to transfer data through this memory.For the memory chip to operate, it requires a voltage not exceeding 0.01mA.There is a set of 20 pins included with the part.I think it's important to point out that this is a memory IC that has a 10MHz frequency that can be operated at.There is a configuration of COMMON for the memory's I/O.Memory is recommended that a 5V power supply be used.Memory features USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS to better serve the need.
XC1765EPC20I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1765EPC20I Applications
There are a lot of Xilinx Inc. XC1765EPC20I applications of configuration proms for FPGAs.
- personal computers
- embedded logic
- nonvolatile BIOS memory
- cell phones
- main computer memory
- networking
- servers
- data buffer
- supercomputers
- telecommunications
